Curtains. Saturday , October 07th , 2017 - 15:49:57 PM
Some curtains require some lining at the back to make them thick. In this case, cut the lining material of the same length as the curtain fabric. Pin the two fabrics with their plain sides facing each other. Sew the two materials together at the border with a sewing machine. Fold the edges at least half an inch inwards along three sides and then hem sew it using the sewing machine. Only one of the shorter sides should be left unstitched. However if you want to add drapery weights on the bottom side of the curtain you should leave it unstitched too.
The first step to take when measuring for curtains is to start by measuring the width of the curtain pole or track this will then determine how long you would like your curtains to be. A curtain pole is a good indicator as to where the curtains will finish either at the seal length below the seal or touching right down to the floor we recommend as a rough guide that the curtains should finish 1.5 cm above the sale. If you would like your curtains to fall below the seal we recommend that they finished 15 cm below that if you want your curtains to flow from top to bottom from the rod to the floor we would then recommend a gap of 1.5 cm above the floor.
Prolong the life of your drapes by regularly removing dust and dirt. Once a week you should vacuum the curtains using the upholstery attachment. Some curtains are light and delicate. In these cases vacuuming could damage them, so give them a good shake instead to dislodge dust particles.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Homedepotblog claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.