Curtains. Saturday , October 07th , 2017 - 15:19:11 PM
Some curtains require some lining at the back to make them thick. In this case, cut the lining material of the same length as the curtain fabric. Pin the two fabrics with their plain sides facing each other. Sew the two materials together at the border with a sewing machine. Fold the edges at least half an inch inwards along three sides and then hem sew it using the sewing machine. Only one of the shorter sides should be left unstitched. However if you want to add drapery weights on the bottom side of the curtain you should leave it unstitched too.
The buttonhooks require some extra fabric to make the straps. You will need a number of straps cut into equal sizes depending on the length of the curtain. The buttons should then be sewed on one end of each strap. Finally make buttonholes at the top edge of the curtain with regard to the size of the straps. One of the advantages of this method is that by adjusting the position of the buttonholes you can adjust the height of the curtain from the ground.
Some of today’s more modern windows and patio doors open inwards leaving little space to fix. With curtain tracks that can be as small as 5mm and some that can even be recess fixed into a ceiling, this will leave plenty of room for a window or door to open inwards.
Any content, trademark’s, or other material that might be found on the Homedepotblog website that is not Homedepotblog’s property remains the copyright of its respective owner/s. In no way does Homedepotblog claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.